Quality Representative
Thomas Instrument Thomas Instrument Brookshire, TX Brookshire, TX Full-time Full-time $18 - $22 an hour $18 - $22 an hour Work Eligibility (ITAR):
This position must meet Export Control compliance requirements, therefore a US Person as defined by 22 C.
F.
R.
120.
15 is required.
US Person includes US Citizen, lawful permanent resident or persons with protected status.
Employer will not sponsor applicants for employment visa status.
Thomas Instrument:
Is the leading privately held provider of engineering solutions and manufacturing excellence for complex, critical aerospace flight control hardware.
Has a stable workload (varied customer base) with a strong domestic and international reputation for quality and integrity.
Offers all phases of development and all stages of the product lifecycle, supporting a highly diverse product mix.
Thomas Instrument is AS9100D, NADCAP, and FAA certified.
Has two engineering and manufacturing facilities.
Has a friendly atmosphere and an outstanding safety record.
Full benefits available including immediately vested 4% match to 401k.
Job Description:
The Quality Representative is an integral part of the daily execution of our final customer acceptance of flight hardware and the site tool and equipment calibration system.
The role will be responsible for accurate and controlled execution of customer acceptance/sell-off processes, tool calibration to the standards and transactions that support products from assembly, final inspection, and to product shipments.
This role serves as the primary point of contact between Production, Government Quality Representatives, and the Shipping Dock as a source of information on final product acceptance.
This role is key between Quality and Operations to ensure:
On-time release of units to shipping as well as maintaining correct records in the business systems assigned.
On time and control over the tools and equipment in our calibration system used for product verifications.
The successful candidate will need to demonstrate a track record of being organized, and process driven, with speed and accuracy to ensure quality requirements and customer schedules are met.
Job
Responsibilities:
Plans, validates compliance, and stages product and documentation for customer acceptance.
Reviews, creates and releases calibration requests & PO for outside calibrations.
Perform data transactions on findings and support operations in root cause/corrective action as needed.
Proactively identify, communicate, and find solutions to quality and calibration compliance risks in schedule.
Monitors calibration system, and anticipates and resolves calibration issues prior to shop impacts.
Participate in daily production meetings to engage, maintain, and inform of impacts to product compliance or issues seen.
Primary point of contact between Customer, Quality, and Operations for Customer acceptance & Calibration issues.
Responsible for facilitating and executing assigned internal audits in accordance with AS9100 and Government contract requirements.
Provide reports/metrics to management as required including assigned KPIs.
Job Requirements:
1
years in a fast-paced high accuracy environment (Aerospace/Medical a plus) Excellent communication skills and ability to work in a fast-paced environment with multi-disciplinary teams.
Demonstrated transactional accuracy in business systems, process control, safety mindset, Strong analytical ability to gather and interpret data, in situations where problems deal with people, processes, and data transactions.
Multi-tasker who pays attention to detail.
Ability to organize and prioritize work.
Keep assigned areas clean and organized, achieving the site's Lean 5S expectations.
Experience with adaptive problem-solving approaches and implementing solutions.
Work well in a team-based stakeholder-driven environment.
Ability to work independently with operations, customers, buyers, and production control members.
Possess excellent listening skills.
Be able to lift at least 25 lbs.
Ability to be forklift certified.
Experience Preferred:
Experience in computer/data inputs (performing system transactions).
Experience with Microsoft Excel and Word.
Job Type:
Full-time.
Work Eligibility (ITAR):
This position must meet Export Control compliance requirements, therefore a US Person as defined by 22 C.
F.
R.
120.
15 is required.
US Person includes US Citizen, lawful permanent resident or persons with protected status.
Employer will not sponsor applicants for employment visa status.
Thomas Instrument is an EEO employer.
Applicants are considered for all positions without regard to race, color, religion, sex, national origin, age, veteran status, medical condition (GINA), or disability.
Job Type:
Full-time Pay:
$18.
00 - $22.
00 per hour Expected hours:
40 - 48 per week
Benefits:
401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance Experience level:
1 year Schedule:
Monday to Friday Weekends as needed Work setting:
In-person Manufacturing facility Office Warehouse Ability to Relocate:
Brookshire, TX 77423:
Relocate before starting work (Required) Work Location:
In person The Quality Representative is an integral part of the daily execution of our final customer acceptance of flight hardware and the site tool and equipment calibration system.
The role will be responsible for accurate and controlled execution of customer acceptance/sell-off processes, tool calibration to the standards and transactions that support products from assembly, final inspection, and to product shipments.
This role serves as the primary point of contact between Production, Government Quality Representatives, and the Shipping Dock as a source of information on final product acceptance.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
This position must meet Export Control compliance requirements, therefore a US Person as defined by 22 C.
F.
R.
120.
15 is required.
US Person includes US Citizen, lawful permanent resident or persons with protected status.
Employer will not sponsor applicants for employment visa status.
Thomas Instrument:
Is the leading privately held provider of engineering solutions and manufacturing excellence for complex, critical aerospace flight control hardware.
Has a stable workload (varied customer base) with a strong domestic and international reputation for quality and integrity.
Offers all phases of development and all stages of the product lifecycle, supporting a highly diverse product mix.
Thomas Instrument is AS9100D, NADCAP, and FAA certified.
Has two engineering and manufacturing facilities.
Has a friendly atmosphere and an outstanding safety record.
Full benefits available including immediately vested 4% match to 401k.
Job Description:
The Quality Representative is an integral part of the daily execution of our final customer acceptance of flight hardware and the site tool and equipment calibration system.
The role will be responsible for accurate and controlled execution of customer acceptance/sell-off processes, tool calibration to the standards and transactions that support products from assembly, final inspection, and to product shipments.
This role serves as the primary point of contact between Production, Government Quality Representatives, and the Shipping Dock as a source of information on final product acceptance.
This role is key between Quality and Operations to ensure:
On-time release of units to shipping as well as maintaining correct records in the business systems assigned.
On time and control over the tools and equipment in our calibration system used for product verifications.
The successful candidate will need to demonstrate a track record of being organized, and process driven, with speed and accuracy to ensure quality requirements and customer schedules are met.
Job
Responsibilities:
Plans, validates compliance, and stages product and documentation for customer acceptance.
Reviews, creates and releases calibration requests & PO for outside calibrations.
Perform data transactions on findings and support operations in root cause/corrective action as needed.
Proactively identify, communicate, and find solutions to quality and calibration compliance risks in schedule.
Monitors calibration system, and anticipates and resolves calibration issues prior to shop impacts.
Participate in daily production meetings to engage, maintain, and inform of impacts to product compliance or issues seen.
Primary point of contact between Customer, Quality, and Operations for Customer acceptance & Calibration issues.
Responsible for facilitating and executing assigned internal audits in accordance with AS9100 and Government contract requirements.
Provide reports/metrics to management as required including assigned KPIs.
Job Requirements:
1
years in a fast-paced high accuracy environment (Aerospace/Medical a plus) Excellent communication skills and ability to work in a fast-paced environment with multi-disciplinary teams.
Demonstrated transactional accuracy in business systems, process control, safety mindset, Strong analytical ability to gather and interpret data, in situations where problems deal with people, processes, and data transactions.
Multi-tasker who pays attention to detail.
Ability to organize and prioritize work.
Keep assigned areas clean and organized, achieving the site's Lean 5S expectations.
Experience with adaptive problem-solving approaches and implementing solutions.
Work well in a team-based stakeholder-driven environment.
Ability to work independently with operations, customers, buyers, and production control members.
Possess excellent listening skills.
Be able to lift at least 25 lbs.
Ability to be forklift certified.
Experience Preferred:
Experience in computer/data inputs (performing system transactions).
Experience with Microsoft Excel and Word.
Job Type:
Full-time.
Work Eligibility (ITAR):
This position must meet Export Control compliance requirements, therefore a US Person as defined by 22 C.
F.
R.
120.
15 is required.
US Person includes US Citizen, lawful permanent resident or persons with protected status.
Employer will not sponsor applicants for employment visa status.
Thomas Instrument is an EEO employer.
Applicants are considered for all positions without regard to race, color, religion, sex, national origin, age, veteran status, medical condition (GINA), or disability.
Job Type:
Full-time Pay:
$18.
00 - $22.
00 per hour Expected hours:
40 - 48 per week
Benefits:
401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance Experience level:
1 year Schedule:
Monday to Friday Weekends as needed Work setting:
In-person Manufacturing facility Office Warehouse Ability to Relocate:
Brookshire, TX 77423:
Relocate before starting work (Required) Work Location:
In person The Quality Representative is an integral part of the daily execution of our final customer acceptance of flight hardware and the site tool and equipment calibration system.
The role will be responsible for accurate and controlled execution of customer acceptance/sell-off processes, tool calibration to the standards and transactions that support products from assembly, final inspection, and to product shipments.
This role serves as the primary point of contact between Production, Government Quality Representatives, and the Shipping Dock as a source of information on final product acceptance.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
